Bubbling-Swelling
Swelling/bubbling can occur along the edges of laminate planks when standing water or liquid enters in-between the joints of the adjoined planks. When sufficient moisture is absorbed into the laminate core material, the core begins to swell. Not all core materials are as resistant to moisture...
Noise issues
Noises in the floor are caused when movement occurs between two (or more) contacting surfaces. Each of the individual components, which make up the floor system, can be responsible for a noise-related condition. These points of contact include the laminate flooring locking mechanisms, surface edges,
Buckling
Buckling is a condition where planks compress against one another creating lateral stress that is relieved by the planks lifting "heaving" off of the sub-floor. When the limits of the planks to absorb lateral stresses are exceeded, the flooring pushes laterally upward; causing a buckle.
Tapping Damage
Edge damage and chipping can occur during transport, handling, installation or from use. Planks should be visibly inspected prior to installation and if installed, the material is deemed acceptable by the installer. Any edge damage that is visible shortly after installation is normally installation